DIY Wood Floor Installation Guide

Do-it-yourself installation is not complicated. Besides, if you know how to install wood flooring, you can save the money for other home improvement projects.

There are simple guidelines to follow for DIY wood floor installation. Once you follow these instructions, the rest of the process will be trouble-free. Simply make sure that the house is completely free of appliances, furniture and other objects so you can focus on laying down your wood flooring. Rid the surface of rubbish and dust before starting this task.

Techniques in Installing Wood Flooring

The first method is called floating installation. It is the easiest DIY process in mounting wood floors since it does not require special talents and experience. All you need to do is to purchase polyvinyl acetate which is the most common type of adhesive in the market. This PVA glue will be used to fasten the groove and tongue as one. When you choose this procedure, an underlay is needed to act as partition between the floor and sub-floor. It also acts as a barrier against moisture and form of insulation. Underlay reduces the sound of steps on the floor. It is necessary to acquire top-quality underlay for floating installation. Experts advise not to employ this method for solid wood flooring.

The second process is known as glue down installation. It calls for the use of a strong adhesive which should be put directly on concrete or wooden sub-flooring. Make sure to follow safety pointers when you use these chemical agents. When you work on concrete sub-floors, the initial step is apply a two-part moist epoxy casing to prevent any moisture from going up to your newly-installed flooring. You can expect glue-down installation to be durable for as long as this is done correctly. Just make sure to allow sufficient time before you attempt to work on the wood flooring. This “drying period” enables the adhesive to stick permanently to the floor.

The third procedure is referred to as nail-down installation. It is considered as the most uncomplicated technique in solid wood floor installation. You need a sub-floor made of wood and enough time to work on this task. There are no directions required if you install on top of plywood. In other words, you can lay down floorboards as you wish. Nevertheless, it is important to place the pieces of wood in a reverse direction as against the existing planks. The result is a zigzag pattern. It is important to nail down thick solid wood floors because these are fairly dense and should be kept in place. It is practical to get the services of an experienced worker to do the nailing down since this consumes a lot of time. The process calls for special tools and gear. In short, this is not really an easy DIY task. You also need some skills and technical know-how before embarking on this installation.

Now that you have been introduced to the different kinds of do-it-yourself installation for solid wood flooring, it is easier to choose one that will fit your capability and requirements.